DUAL DRIVE ALUMINUM FIREWIRE 800 and USB 2.0 Drive Enclosure for MAC and PC FireWire 800 (1394b) & USB 2.0 ComBo to ATA external enclosure for 3.5" HDD FEATURES Aluminum Enclosure Design: good heat dissipation Easy installation Support standard 3.5 inch HDD FireWire 800 (1394b) or USB 2.0 ComBo interface FWBU2ATA35-2 is a FireWire 800 (1394b) & USB 2.0 ComBo to ATA external enclosure designed to enable hot-swap, plug-and-play operation for 3.5 inch ATA HDD through the connection to USB 2.0 or FireWire 800 (1394b) interface installed on a computer. FWBU2ATA35-2 allows users to easily hot-swap ATA hard disk drive without interrupting the current operation. FWBU2ATA35-2 provides the perfect solution for data backup and transferring of data between computers using hard disk drives. FWBU2ATA35-2 combines three key components. 1). FireWire 800 (1394b) & USB 2.0 ComBo to ATA Bridge Board 2). Mechanism 3). AC 100 ~ 240 V to DC +12V 3A Power Adapter 1). FireWire 800 (1394b) & USB 2.0 ComBo to ATA Bridge Board: DC Power Connector: 2.0 mm DC Jack USB 2.0 and FireWire 800 (1394b) arbitration: Auto-Switch by detecting USB bus power. USB 2.0 Interface: One mini B-5pin USB connector USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit) USB Bus Power: Self Powered Mode Operation Number of 1394b ports: External X 2 (Bilingual-9pin) 1394b PHY: Ti TSB81BA3 1394 Bus Transfer Rate: 100/200/400/800 Mbps ATA Interface: Female IDC 2X20 Connector Complies with T13's ATA/ATAPI-7 Draft Specification: - PIO Mode 0 ~ 4 - DMA Mode 0 ~ 2 - Ultra DMA Mode 0 ~ 6 Supports 48-bit LBA for large hard drives (>128GB). 2). Mechanism: Aluminum made housing Mobile rack like design - The housing is designed to provide sliding guide in the inner side - The inner metal mounting bracket provide the screw hole for 3.5" ATA HDD. - Design to install the ATA HDD outside the housing Changeable Front Panel - Provide 3 color (Transparency, Blue and Pink color) Front Panel Provide Foot Stand to hold U2FWEIDE35-3 stand still - Provide 3 color (Transparency, Blue and Pink color) Foot Stand Provide Lock Ring for coil cable lock Provide Power indicator LED (Red color) on the front panel Provide ATA Access indicator LED (Blue color) on the front panel Power Switch on the rear panel HARDWARE REQUIREMENTS Desktop PC: with either a built-in FireWire (1394b or 1394a) controller or a FireWire (1394b or 1394a) to PCI Host Adapter equipped with a external FireWire (1394b or 1394a) port. Desktop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port. Laptop PC: with either a built-in FireWire (1394b or 1394a) controller or a FireWire (1394b or 1394a) to CardBus PC Card equipped with a external FireWire (1394b or 1394a) port. Laptop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port. COMPUTER PLATFORM Windows and Mac OPERATING SYSTEM REQUIREMENTS Windows 98 SE Windows ME Windows 2000 Windows XP Apple Mac OS 9.1 or higher DRIVER REQUIREMENTS USB: No driver installation for Windows ME, 2000, XP and Mac OS Driver available for Window 98 SE FireWire: No driver installation for Windows 98SE, ME, 2000, XP and Mac OS KIT INCLUDES: FWBU2ATA35-2 enclosure. Beta 9pin-to-Beta 9pin cable in 1.0m length A-to-Mini B 5pin USB 2.0 cable in 1.0m length. AC 100 ~ 240 V to DC +12V 3A power adapter. Screws for 3.5" HDD T-shape screw driver 3 color (Transparency, Blue and Pink color) front panel 3 color (Transparency, Blue and Pink color) foot stand CD-title (Win98 Drivers and Installation Guide) User's manual Protection bag
More Pictures: