For Windows 7 and Vista, XP, 2000, 2003 etc. New NEC Chip Inside, this is the Best Amplified solution for Hi-Speed USB 2.0 Data Transfer up to 36ft. Away. This Cable will Run Between Any USB 2.0 Device and a Host Computer up to 36ft. Away, Item Uses Standard A Male Port to Connect to Host Computer and Standard B Plug to Connect to any AC Powered USB Device. This Cable Amplifies All Signal So there is no Signal Loss even at 36ft. There is one Limitation, USB Device that Plugs into this Super Long USB Extension Needs to Be AC powered (Plugs into the wall, does not draw power form USB port). That is it, Need to Extand your Printer, Scanner, Digital Photo Frame, Etc. up to 36ft. Away, This item will do the trick! SUPER Long Range USB Device Cable! 36ft. A to B Amplified Signal Cable for Windows And Mac Users NEC Chip Inside only From COOLGear perfect solution for USB projectors, interactive white boards, printers and much more. Product Features: - USB 2.0 specification compliant. - Data transfer rate up to 480Mbps. - True Plug and Play. - No external power require. CE and FCC Approved. USB 2.0 Active Extension Cable by USBGear Unlike passive extension cables, the USBG-36FTAB 2.0 Certified Active Extension Cable (using NEC HUB chip) is an active device that buffers the data going in and out to assure that signal always meets the USB 2.0 Electrical and Timing Specifications. USBG-36FTAB can be used to extend the cable length of any USB 2.0 device. This USB active cable acts as a transparent USB 2.0 Hub Therefore there is no drivers required! Extends and boosts the signal to any USB device supports data transfer speeds up to 480 Mbps Built-in repeater helps maintain Hi-Speed USB 2.0 signal quality, electrical and timing specifications Overcomes the 5 m (16 ft.) USB distance limitation  ideal for connecting most USB printers Provides a single, nondaisy-chainable extension for maximum distance of 11 m (36 ft.) Plug and Play; Windows and Mac compatible  bus-powered requires no external power supply Lifetime Warranty Color Silver Specifications Power is delivered using 22AWG Wires and Signal Is boosted using HUB ASIC Chip to Full USB 2.0 High-Speed Specification over 28AWG Wires USB 1.1 and Hi-Speed USB 2.0 compatible A male to B male Windows 98/Me/2000/XP/Vista/7 and Mac Linux compatible Cable length, 11.0 m (36 ft.); 432 g (15.2 oz) Standard A to B Cable Ends, Plug Your Printer Scanner Whatever USB 2.0 Device you may have directly to this 36ft. long USB Booster Cable.
More Pictures: