USB 2.0 Over IP Network 4-Port Hub Share any USB Device Over TCP/IP Network USB over Ethernet Connect any remote USB device to your computer over the LAN. Share USB devices over TCP/IP network Share any USB device with others by using USB to Ethernet 4-Port Network USB Hub Connect to any USB device anywhere on TCP/IP network. "Hot" Plug-and-Play installation. USB to Ethernet Connector ensures hot plug-and-play installation. Isochronous devices are supported Share your USB device with others over local network or Internet using single application Auto-connect to new USB devices whenever you plug them in Network traffic encryption for secure devices sharing Cross-connectivity: ability to connect to a USB device which is shared on x64 PC from Windows XP x32, and vice versa new! Shared USB ports are automatically re-configured Fully compatible with Windows 2000/XP/2003/x64/Vista/7 OHCI, UHCI and EHCI standards are supported Fully compatible with HyperThreaded and multi-processor systems Works under virtual machine *** Supported USB Devices Cameras Scales Barcode Scanners Cash Registers IO Devices Scanners Webcams USB Hard Drives USB RAID USB Storage MULTI Function Printer Devices Multifunctionals Handhelds USB to Serial RS-232/422/485 Cables Card Readers Fingerprint Readers Size= 5" Wide by 3.5" Long by 1" tall Introduction The NetUSB is an industrial-strength network-based USB Server for connecting four USB devices directly to the 10/100Mbps Ethernet network running TCP/IP. By adding this USB Server to LAN, you can network-enable the USB devices and break the traditional five-meter USB cabling distance limitation. By this implementation, USB devices connected to NetUSB can be made available to remote clients over LAN. Key Features Extends USB cabling distance beyond five meters. Allows USB Devices to be used and shared by client PCs over LAN. Supports wide variety of USB devices. Supports Printer Auto Connect while sharing the printer to different client PCs. Compatible with bulk, interrupt and isochronous type USB devices. Provides Plug and Play function same as on board USB port. Access and monitor USB devices over a User-Friendly Application interface. Industrial metal case. Supports wide input power range: DC 9-30V. Specification The NetUSB USB Server provides: RJ45 Ethernet to 4 USB ports. Allows USB Devices to be used and shared by client PCs over LAN. 4 USB 2.0 High Speed Ports up to 480Mbps speed. Full 500mA power provided to each USB port. USB port supports over current protection. Supports wide variety of USB devices. 10BaseT/100BaseTx Fast Ethernet support. Supports IP addressing as Static or by DHCP. LEDs for system/Ethernet/USB ports. Field-upgradeable firmware. Supports Reset button for system reset. Supports Default button for configuration to default setting. Industrial metal case. Input power range: DC9V~DC30V. Compatible with Windows XP/2003 Server/Vista or greater. Regulatory approvals: FCC Class B (DoC) and CE. " RoHS compliant.
More Pictures: